USD
Care instructions
- Wash on the reverse side with neutral detergents. Do not soak, expose to the sun, and bleach. Iron, steam, or tumble dry at low temperature(max 30℃ or 90℉).
-
More
The oversized sweatpants are a seasonless staple of every wardrobe. Pair them with a hoodie or sweater to create an ultimate casual getup. The fabric is soft, comfy, and durable, reactive-dyed to ensure vivid, long-lasting colors with minimum environmental impact.
Features
- Drawstring
- Elastic waist and cuffs
- Side and rear pockets
- Oversized tapered fit
Fabric
- 100% combed cotton
- Terry
- 20 count plain weave
- Pre-shrunk
- Reactive-dyed for longer-lasting color
- Fabric weight: 380g/m²
Process
- 3-tiered topstiched waistband
- Drawstring with aglets
- Slanted side pockets
- Rear patch pocket
Size guide
Imperial
Metric
| S | M | L | XL | |
|---|---|---|---|---|
| Outseam | 40.9 | 41.7 | 42.5 | 43.3 |
| Waist | 26.8 | 28.7 | 30.7 | 33.1 |
| Hip | 44.1 | 46.1 | 48.0 | 50.4 |
| Leg opening | 20.5 | 21.3 | 22.0 | 22.8 |
| S | M | L | XL | |
|---|---|---|---|---|
| Outseam | 104 | 106 | 108 | 110 |
| Waist | 68 | 73 | 78 | 84 |
| Hip | 112 | 117 | 122 | 128 |
| Leg opening | 52 | 54 | 56 | 58 |
This size guide shows product measurements taken when products are laid flat. Actual product measurements may vary by up to 1″ (2.5cm).
Print details
Reference garment size： XL ()
| Garment part | Print area | Maximum print size |
|---|---|---|
| Front Side | Upper left leg | 4″×15″ |
| Lower left leg | 4″×15″ | |
| Upper right leg | 4″×15″ | |
| Lower right leg | 4″×15″ | |
| Back Side | Upper left leg | 4″×15″ |
| Lower left leg | 4″×15″ | |
| Upper right leg | 4″×15″ | |
| Lower right leg | 4″×15″ | |
| Right pocket | 4″×4″ |
Front Side - Upper left leg
The print area is close to the left outseam, its top edge horizontally aligned with the crotch point.
A = 1 - 1.5cm (Measurement error limit: cm)
B = 1 - 1.5cm (Measurement error limit: cm)
Print file guidelines
1. Please upload JPG or PNG images that are under 50MB.
Currently, only JPG and PNG formats are supported. We recommend uploading images of 150 DPI or higher to ensure ideal print quality.
Do's and Don'ts
1. Make sure the images uploaded to different print areas are not overlapping.
If images uploaded to different print areas are overlapping, the overlapping part cannot be printed out properly. Please make sure there's a margin between the images placed in different print areas.
2. Do not create an image by piecing together fragments uploaded to adjacent print areas.
Even if a fragmentary image appears seamless in Design Creator or mockup preview, the print result will not turn out as expected.
3. Do not use white designs on white garments.
We do not print white ink on white garments because it is not visible on white fabric, so the printed design will not show up.
Our real-time inventory keeps you informed of the availability of each product variant. Once a variant is marked as "Out of stock", we will replenish it within 5 business days. Variants marked as "unavailable" are not included in our inventory.
- In stock
- Out of stock
Unavailable
| S | M | L | XL | |
|---|---|---|---|---|
| Pastel Blue | | | | |
| Beaver | | | | |
| Moon Mist | | | | |
| Heather Gray | | | | |
| Mineral Green | | | | |
| White | | | | |
| Black | | | | |
| Dark Vanilla | | | | |
| Eclipse Gray | | | | |
Embroidery details
Reference garment size: M (Scaling guide)
| Garment part | Embroidery Area | Embroidery Frames |
|---|---|---|
| Front | Left Leg | 3″×4″ |
| 3″×12″ | ||
| Right Leg | 3″×4″ | |
| 3″×12″ | ||
| Back | Left Leg | 3″×4″ |
| 3″×12″ | ||
| Right Leg | 3″×4″ | |
| 3″×12″ |
Front
Embroidery frames can be placed anywhere within the blue area, and you can add up to 2 frames.
Embroidery Specifications
Embroidery Machine Tajima TMEZ-S1501C Embroidery File Format , jpg, png.DSTThe .dst file, a key format in the embroidery industry, serves as the instruction file for embroidery machines. It contains detailed directions for needle movements, thread selection, and stitch types, enabling intricate patterns to be stitched onto fabrics. (What Is a DST File and How to Get One)
Chameleon.dst
Embroidery Type Flat embroidery Thread COATS Sylko 120D Maximum Thread Color 15 colors Maximum Stitches 3″×4″ (25000 stitches), 3″×12″ (75000 stitches), 12″×12″ (200000 stitches)
Thread Color
- Black
- Silver Gray
- White
- Old Gold
- Yellow
- Orange
- Flamingo
- Navy
- Lime Green
- Kelly Green
- Royal Blue
- Aqua
- Maroon
- Red
- Purple
Download high-resolution color palette.
Supported File Formats
Embroidery Files (
).DSTThe .dst file, a key format in the embroidery industry, serves as the instruction file for embroidery machines. It contains detailed directions for needle movements, thread selection, and stitch types, enabling intricate patterns to be stitched onto fabrics. (What Is a DST File and How to Get One) Chameleon.dst
Upload professional embroidery designs in .dst format and we'll bring them to life.
Text
Over 110 fonts are available for selection. You can customize font position, size, color, rotation, and shape.
Images
When you upload an image for embroidery design, we will digitize it into an embroidery file. Learn what is digitization and the digitization fee.
For a detailed guide on creating the perfect embroidery file, please refer to this link.
Pricing
You can add multiple embroidery frames (areas for placing embroidery on garments) to each product template. Each frame has different dimensions, stitch counts, and prices:
Frame Stitches(included) Price Extra Stitches 3″×4″ 15000 USD 1.99 1000 stitches / USD 0.3 3″×12″ 20000 USD 3.49 1000 stitches / USD 0.3 12″×12″ 25000 USD 4.99 1000 stitches / USD 0.3 Multi-process fee: USD 2.99 (For using DTG and embroidery on the same garment) * The number of thread colors you select won't change the cost of your embroidery.
* If you upload an image for embroidery design,will apply.digitization feeThe following are standard digitization fees based on membership tiers:
* When you upload a DST file for embroidery design, there's no digitization fee.Do's and Don'ts
1. Avoid complex details or small text
Fine details can be lost due to texture size limits, and extremely thin elements and small text often don't turn out well in embroidery.
2. Use proper stitch density
Since we use the Tajima TMEZ-S1501C embroidery machine and COATS Sylko 120D thread, we recommend that the stitch density of the uploaded DST files be controlled between 0.3mm and 0.5mm. Excessively dense stitches may damage the fabric, cause puckering, and affect the garment's elasticity. Conversely, stitches that are too sparse may lead to edge fraying and loose threads, compromising both appearance and durability. Proper stitch density ensures that embroidery patterns remain clear, secure, and do not damage the fabric.
3. Choose appropriate garments
The type of fabric you choose is key to your embroidery's appearance. For big or detailed designs with sharp edges, go for thicker fabrics like sweatshirts. They give better support and prevent fabric damage. Lighter fabrics like thin T-shirts, especially those under 200g, are better for smaller, simpler designs to keep the fabric smooth.
4. Minimize color changes
Our Design Creator limits the number of color changes to 30 for a single DST file. For multi-color designs, we recommend that the same color count as only one color change to streamline the color sequence and reduce redundant color change (COLOR_BREAK) commands.
5. Avoid designs requiring exact alignment of embroidery and DTG
Even if the product preview appears perfectly aligned, exact position matching cannot be guaranteed in actual production.
Scaling Guide
Embroidered patterns will maintain their actual size across all garment sizes. If a garment has both DTG and embroidery on the same side, neither will be scaled.
FAQS
- Can I use both DTG printing and embroidery on the same product?
- Yes, you can use both DTG printing and embroidery on the same product template at PODpartner.
- How long does the embroidery process take?
- The timeline for your embroidery order depends on whether your design needs digitization. Design digitization typically takes 1-2 business days for standard processing, with each revision requiring an additional 1-2 business days. Keep in mind that digitization is a one-time process, so only your first order with a new design will need this step.
For production, 98% of our orders complete production within 48 hours. If you choose to combine DTG (Direct-to-Garment) printing with your embroidery, this won't extend your production time.
For detailed shipping information, please visit the "Shipping" section in the navigation bar on our website.
- Are there any digitization fees for embroidery at PODpartner?
- Digitization fees will only be charged when uploading images that need to be converted into embroidery files, and this fee will apply only to the first order of that product template.
There are no digitization fees for uploading .dst files or using custom text embroidery. However, you are responsible for ensuring the quality of the .DST file you upload. If there are issues with your .DST file that require our assistance for modifications, please note that a modification fee will apply in this situation.
- Does the number of thread colors affect the price of my embroidery?
- No. The price remains the same whether you use one color or 15 colors in your embroidery design.
- Will the final garment look exactly like my design?
- While we strive to produce garments that closely match your design, there may be subtle differences due to the printing process and fabric characteristics. Factors such as color variances, fabric texture, and techniques can affect the final appearance. If there is a discrepancy between the design area and the mockups, the final appearance will be based on the design area.